Mini Cyclcone Mod Using an Old Household Vac

Mini Cyclcone Mod Using an Old Household Vac

    We had an old Eureka upright that still worked quite well as a hose vacuum even though the floor brush and intake was cracked beyond repair. So, I disassembled the vacuum and set it into a spray foam cradle for noise and vibration dampening. I then...
Beech and Walnut Workbench

Beech and Walnut Workbench

    Wanted to share the work bench that I had built. I decided that I was going to be a purist and use only traditional hand tools on this, and I did. (Mostly) all of the dimensioning of the lumber was done at a mill, but other than that I used all hand...
DIY Wood – Folding Stool

DIY Wood – Folding Stool

   With two pieces of pine and easy tools, make this easy-to-store seat. Perfect picnic. A folding stool or two is perfect for a picnic in the park – or your backyard. To make a matching table, just upsize the stool components. This easy job made from two...
Recover a Gouge Manage

Recover a Gouge Manage

    Re-setting a flavor into a loose manage is a challenge I take often, but in the situation of my recently acquired W. Butcher cut, I intended to do the job with extra reverence. I was so pleased by the quality of my new– but actually older–...
Page 1 of 512345