Wedgie Sled and 1st Run at Segments

Wedgie Sled and 1st Run at Segments

    My first attempt at a Wedgie Sled and the first set of segments I cut with the sled… The sled, saw stop and segment deflector are all made from 3/4” MDF. I’ve very happy with the results. Woodworking Projects at LumberJocks.com Read...
Jewelry Box for me

Jewelry Box for me

    Finally a piece that I keep. A jewelry box for me and some of my wears Acacia wood Ron Woodworking Projects at LumberJocks.com Read...
Bandsaw Box

Bandsaw Box

    1. Started with a 3” by 6” by 3” 4 block of wood (alder) 2. I drew the outline of my box onto the block of wood.3. I cut 1/4” off the back of the block and set it aside.4. I drew the shape of the drawer onto the box and cut it...
First attempt in chip carving

First attempt in chip carving

    After some practice on scrap pieces, I have realized it was time to try a little chip carving project. Woods are basswood and Mansonia (for the trims). Chip carving was made with a Flexcut knife. Finished with Danish Oil. It will be sold for charity...
Apple and Cherry wood toddler time out bench

Apple and Cherry wood toddler time out bench

    I finally completed the time out chair that I have been building for my rambunctious 2 year old daughter. This project is my first one where I used Mortise and tenon joinery. All my previous “fine furniture” builds have included cheap pine...
A Look at the Seaton Device Chest

A Look at the Seaton Device Chest

    The initial actual device upper body that I built was based (freely) on Benjamin Seaton’s renowned tool breast that currently stays at the Guildhall Gallery in Rochester, England. Many woodworkers recognize it due to the renowned publication...
Page 20 of 22« First...10...1819202122